저자명 Yanshan Lou Gihyun Bae Changsoo Lee Hoon Huh 
Name Proceedings of the 10th international conference of NUMIFORM 2010 
Place Korea 
Year 2010 
This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET’2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the
drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the rvalue distribution.
번호 제목 저자명 날짜 조회 수
176 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.02.06 9160
175 TOPOLOGY OPTIMIZATION OF PLASTIC STRUCTURES USING FINITE ELEMENT LIMIT ANALYSIS file Jongsup Lee, Hoon Huh  2009.07.30 9141
174 Dynamic Failure Characteristics of Electric Resistance Spot Welds in DP Steel Sheets [2] file Jiwoong Ha Hoon Huh J...  2012.12.10 9022
173 Compressive Characteristics of PBX Simulant with the Variation of the Strain Rate file Chunghee Park, Sehwan...  2012.09.21 8949
172 Variational Time Integrators for Handling Discontinuous Interfaces in Solids file S. J. Lim S. S. Cho H...  2012.03.20 8140
171 MECHANICAL CHARACTERISTICS OF PBX SIMULANT CONSIDERING STRAIN RATE EFFECT file Chunghee Park Sehwan ...  2011.07.04 7975
170 Development of Buffer Stopper Using Progressive Compression Process for Crash Energy Absorption of a Railway Vehicle file Kwanghyun Ahn Hoon Hu...  2012.12.10 7791
169 Material Behaviors of PBX Simulant with Various Strain Rates [1] file Chunghee Park Sehwan ...  2013.01.08 7732
168 Buffer Stopper Using Progressive Compression Process for Crash Energy Absorption of a Railway Vehicle Kwanghyun Ahn Hoon Hu...  2011.12.22 7687
167 Micro-Tensile Tests of Aluminum Thin Foil with the Variation of Strain Rate file J.B. Kwon J. Huh H. H...  2012.06.19 7532
166 Evaluation of Dynamic Hardening Models for Metallic Materials at Wide Range of Strain Rates file Hoon Huh Kwanghyun Ah...  2012.09.26 7473
165 Quantification of Material Properties of Structural Materials for Warhead at Various Strain Rates file Kwanghyun Ahn Hoon Hu...  2012.09.26 7415
164 Effect of helicity on the buckling behavior of single-wall carbon nanotubes file Jeehyang Huh Hoon Huh  2008.12.15 7405
163 Ductile fracture of dual phase steel: mechanisms, modeling, prediction and prospective applications file Yanshan Lou, Hoon Huh  2013.02.01 7393
» Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function file Yanshan Lou Gihyun Ba...  2010.07.14 7390
161 Material Properties of PBX Simulant Considering Strain Rate Effect file Chunghee Park Sehwan ...  2010.12.22 7225
160 Rate-dependent two-surface model for cyclic hardening behaviour of advanced high strength steel sheets file Jeehyang HUh Hoon Huh...  2012.11.06 7202
159 Effect of Strain Rate on the Material Characteristics of a Fragment-Simulating Warhead and an Armor Plate file Jiwoong Ha Hoon Huh K...  2012.06.27 7118
158 Development and investigation of nonlinear shell elements with drilling degree of freedom file H. W. Lee H. Huh  2005.11.29 6835
157 Prediction of forming limit diagrams of DP590 steel based on the M-K model with experimental verification file Yanshan Lou Seokbong ...  2010.12.27 6740