저자명 Kwanghyun Ahn, Hoon Huh, and Jonghun Yoon 
Journal Metals and Materials International 
Volume 19 
Number
Pages 749-758 
year 2013 
This paper is concerned with the effect of deformation twinning on the strain hardening behavior of commercially
pure titanium during the compressive loading. In accordance with many studies on titanium, the
strain hardening behavior of titanium during compression has different characteristics from those of general
metallic materials. It has been reported that the strain hardening rate of titanium during compression can
be divided into three stages. In the first stage, the strain hardening rate decreases as the strain increases
due to dynamic recovery. Following the first stage, however, a sudden increase in the strain hardening rate
is observed in the second stage. It is well known that the occurrence of the second stage is due to the generation
of deformation twinning. After the second stage, the strain hardening rate decreases again as the strain
increases in the third stage. In this paper, a strain hardening model that can represent the three stages of
strain hardening is proposed based on the investigated effect of deformation twinning on the strain hardening
behavior of titanium. The electron backscatter diffraction (EBSD) analyses are conducted to quantify the
twin volume fraction with increase of compressive plastic strain, which provide fundamental frame of the
hardening model for titanium.
번호 제목 저자명 날짜 조회 수
125 Evaluation of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions with a servo-hydraulic high speed testing machine file Junbeom Kwon, Hoon Hu...  2017.06.07 150
124 Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates file Geunsu Joo, Hoon Huh,...  2017.06.07 102
123 Evaluation of the effect of the strain rate on the tensile properties of carbon–epoxy composite laminates file J. Kwon, J. Choi, H. ...  2017.06.07 94
122 Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates file N. Park, M. Park, J.B...  2017.06.07 105
121 Fracture-based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming file N. Park, H. Huh, S.J....  2017.06.07 87
120 Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet file M.K. Choi, H. Huh, an...  2017.06.07 95
119 Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation file Keunhwan Pack, Kwangh...  2015.12.01 1534
118 Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre-Strain file S. B. Kim and H. Huh  2015.11.18 1180
117 Anisotropy Effect on the Fracture Model of DP980 Sheets Considering the Loading Path file N. PARK, H. HUH, J. B...  2015.06.15 1682
116 Evaluation of dynamic hardening models for BCC, FCC,and HCP metals at a wide range of strain rates Hoon Huh, Kwanghyun A...  2015.02.16 2165
115 Specimen and Grain Size Effects of Al1100 on Strain and Strain Rate Hardening at Various Strain Rates for Al1100 file Junbeom Kwon, Hoon Hu...  2014.08.20 2704
114 Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain rates file Chunghee Park, Hoon H...  2014.04.11 3629
113 New pseudo-elastic model for polymer-bonded explosive simulants considering the Mullins effect file Kee Sun Yeom Sehwan J...  2013.12.10 3956
112 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.12.10 3391
» Strain Hardening Model of Pure Titanium Considering Effects of Deformation Twinning file Kwanghyun Ahn, Hoon H...  2013.09.16 3922
110 Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation file Yanshan Lou Hoon Huh  2013.04.08 5703
109 Effect of strain rate on plastic anisotropy of advanced high strength steel sheets file Jeehyang Huh Hoon Huh...  2013.04.02 3723
108 Consideration of strength differential effect in sheet metals with symmetric yield functions file Yanshan Lou Hoon Huh ...  2013.03.21 3950
107 Material Behaviors of PBX Simulant with Various Strain Rates [1] file Chunghee Park Sehwan ...  2013.01.08 5913
106 Extension of a shear-controlled ductile fracture model considering the stress triaxiality and the Lode parameter file Yanshan Lou Hoon Huh  2012.12.11 5273