저자명 Namsu Park, Moonsu Park, Hoon Huh 
Name 2014 KSAE Annual Conference 
Year 2014 
page  

This paper deals with the tensile properties acquisition of the nugget region in spot-welded joint at various strain-rates using micro material testing machine. The driving and load measuring part of Static Micro Material Testing Machine (SMMTM) and High-Speed Micro Material Testing Machine (HSMMTM) were replaced by considering the load requirement. A jig and a gripping device are designed to meet the requirements of the specimen shape and strength. Two kinds of specimens for the tensile tests were obtained each from the center of the welded spot and 1 mm away from the centerline at the spot welded joint of the DP980 by wire electric discharged machining (EDM). The thickness of the specimen was 0.3 mm and the gage length of the specimen was 1 mm. Digital image correction method (DIC) was applied to measure the longitudinal strain. The speckle pattern generation method was also improved for DIC method application. Quasi-static tests were performed with SMMTM at strain-rates of 0.001 s1 and 0.1 s1. Dynamic tests were performed with HSMMTM at strain-rates of 1 s1, 10 s1 and 100 s1. A comparative evaluation was performed between the material properties of the base metal and the nugget region in spot welded joint, based on the obtained stressstrain curves.

번호 제목 저자명 날짜 조회 수
16 The stress softening-effect of polymer-bonded explosive simulant for shear deformation file Kee Sun Yeom Hoon Huh...  2013.12.10 5034
15 Evaluation of Standard Uncertainty in Modified Measurement of Dynamic Tensile Properties of Auto-body Steel Sheets file Min Kuk Choi, Sehwan ...  2013.12.27 4778
14 Experimental Investigation of the Effect of the Forming Speed on the Springback Behavior of DP780 Steel Sheets file M. K. Choi, H. Huh  2013.12.27 4895
13 Evaluation and Prediction of Tensile Properties of CFRP file Junbeom Kwon, Jaeyoun...  2013.12.27 4968
12 Measurement Uncertainty Evaluation of High Speed Tensile Properties of AZ 31 Sheet Considering Correlation file M. K. Choi, H. Huh, C...  2014.06.24 4010
» Tensile Properties of Nugget Region in Spot-welded Joints at Various Strain-Rates file Namsu Park, Moonsu Pa...  2014.07.01 4604
10 Prediction of Deformation Behavior of PBX Simulant in a Warhead during High Speed Crash file Namsu Park, Chunghee ...  2014.07.01 4838
9 Tension/compression Hardening Behavior of Auto-body Steel Sheets at Intermediate Strain Rates file Geunsu Joo, Minkuk Ch...  2014.07.10 4762
8 Evaluation of Structural Design for Improvement of the Roof Strength of a Three-Wheel Vehicle file Jesung Yoo, Junbeom K...  2014.07.10 4441
7 Prediction of Fracture Strains for DP980 Steel Sheets at a Wide Range of Loading Paths file N. Park, H. Huh  2014.10.29 4334
6 Evaluation of Dynamic Hardening Models With Taylor Impact Tests at Ultra High Strain Rates For 4340 Steel file M.J. Piao, I. Lee, H....  2015.06.15 4898
5 Modeling of a Ductile Fracture Model Considering the Anisotropy of Sheet Metal file N. Park and H. Huh  2015.12.28 3155
4 Evaluation of Tensile Properties of Auto-body Plastics Using DIC Method and Force Equilibrium Grid Method file Jesung Yoo, Park Nams...  2017.06.07 1617
3 Evaluation of Measurement Uncertainty of Dynamic Tensile Properties M.K. Choi, H. Choe, H...  2017.06.07 1601
2 Tension/compression Test of Giga-grade Steel Sheets Considering Intermediate Strain Rates file Geunsu Joo, Hoon Huh  2017.06.07 1568
1 Evaluation of Dynamic Hardening Models With Taylor Impact Tests at Ultra High Strain Rates For 4340 Steel file M. J. Piao, I. Lee, H...  2017.10.11 1813