저자명 Min Kuk Choi, Hoon Huh 
Name ICTP 2014 
Place Nagoya, Japan 
Year 2014 
This paper deals with the experimental and numerical investigation of the effect of the punch speed on the amount of springback in U-bending of auto-body steel sheets. U-bending tests and finite element analysis of SPCC and DP780 steel sheets were conducted for springback evaluation at different punch speeds with the geometry adopted from the NUMISHEET ‘93 benchmark problem. For the U-bending test, INSTRON8801 dynamic materials testing machine and a newly designed U-bending jig were used to conduct U-bending tests at different punch speeds. Experimental results show that the amount of springback of SPCC decreases but that of DP780 increases as the punch speed increases. For the finite element analysis, mechanical properties of SPCC and DP780 steel sheets considering the strain rate were obtained and the results of the analysis are presented in comparison to experimental measurements and to investigate the effect of punch speed on the amount of springback
번호 제목 저자명 날짜 조회 수
156 An improved technique for reducing the load ringing phenomenon in tensile tests at high strain rates file J.B. Kwon, H.Huh, C.N...  2015.08.08 1568
155 Validation of Dynamic Hardening Models With Taylor Impact Tests at High Strain Rates file MingJun Piao, Chunghe...  2015.06.15 1803
154 Roof Structure Design and Evaluation for Improvement of Roof Strength of Three-Wheel Vehicles file Jesung Yoo, Junbeom K...  2015.06.15 1772
153 A Newly Developed Clamping Device for the Tension/compression Test at various Strain Rates file Geunsu JOO, Min Kuk C...  2014.12.23 2402
» Effect of punch speed on the amount of springback in U-bending process of auto-body steel sheets Min Kuk Choi, Hoon Huh  2014.10.30 3259
151 Prediction of Fracture Strains for DP980 Steel Sheets using a Modified Lou-Huh Ductile Fracture Model file Namsu Park, Hoon Huh  2014.10.29 2552
150 High Speed Tensile Properties and Measurement Uncertainty of Auto-body Steel Sheets at Intermediate Strain Rates M.K. Choi, S. Jeong, ...  2014.10.07 2578
149 Prediction of Deformation Behavior of PBX Simulant in a Warhead During High Speed Crash file Namsu Park, Chunghee ...  2014.07.01 2775
148 Optimization of Combined Deep Drawing and Electromagnetic Corner Fill Process of DP980 Steel Sheet file M. K. Choi, H. Huh, N...  2014.06.24 2914
147 Anisotropy Effect on the Stress-Based Fracture Forming Limit Diagram Using a Modified Lou–Huh Ductile Fracture Criterion file Namsu Park and Hoon Huh  2014.01.20 3471
146 Experimental Investigation on the Springback Behavior of DP780 Steel Sheets with Various Process Parameters file Min Kuk Choi, Hoon Huh  2013.12.27 3118
145 Measurement Uncertainty Evaluation for High Speed Tensile Properties of Auto-body Steel Sheets file M.K. Choi, S. Jeong, ...  2013.12.27 2959
144 Effect of Strain Rate on Mechanical Response of PBX Simulant file Chunghee Park, Hoon H...  2013.08.30 3542
143 Fracture Evaluation of Metallic Materials at Intermediate Strain Rates file S. J. Lim, K. H. Ahn,...  2013.08.30 4091
142 Anisotropy Effect on the Fracture Model of DP980 Sheets Considering the Change of Loading Path file Namsu Park, Kwanghyun...  2013.08.29 4792
141 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.02.06 7471
140 Fracture modeling of DP780 sheets using a hybrid experimental‒numerical method and two‐dimensional digital image correlation file Keunhwan Pack Kwanghy...  2013.02.06 5339
139 Ductile fracture of dual phase steel: mechanisms, modeling, prediction and prospective applications file Yanshan Lou, Hoon Huh  2013.02.01 5740
138 Material Behaviors of PBX Simulant with Various Strain Rates [1] file Chunghee Park Sehwan ...  2013.01.08 5776
137 Dynamic Hardening Equation of Nickel-based Superalloy Inconel 718 file Kwanghyun Ahn Hoon Huh  2012.12.10 4919