저자명 Keunhwan Pack, Kwanghyun Ahn, Hoon Huh, and Yanshan Lou 
Journal International Journal of Materials and Product Technology 
Volume 48 
Number  
Pages 34-46 
year 2014 
This paper is concerned with the construction of fracture envelopes of DP780 sheets using two methods: a hybrid experimental-numerical method; two-dimensional digital image correlation (2D-DIC). For the hybrid method, four types of ductile fracture tests were carried out covering a wide range of stress states on specimens: with a central hole; two symmetric circular notches; flat grooved; and diagonally double-notched. Based on the fracture strain and loading paths identified with finite element simulation, a fracture envelope was obtained by employing the three-parameter modified Mohr-Coulomb fracture model. In addition, the fracture surface strain was directly measured using 2D-DIC. Loading histories of each test were extracted from a surface element of a three dimensional finite element model. The comparison of fracture envelopes constructed by the two methods reveals that there is little difference. Thus, it can be concluded that 2D-DIC is applicable to fracture modelling of DP780 sheets despite the assumption of the plane stress condition even after necking.
번호 제목 저자명 날짜 조회 수
128 Characterization of Hardening Behaviors of 4130 Steel, OFHC Copper, Ti6Al4V Alloy Considering Ultra-High Strain Rates and high Temperatures file M. Piao, H. Huh, I. L...  2017.10.11 90
127 Characterization of flow stress at ultra-high strain rates by proper extrapolation with Taylor impact tests file M. Piao, H. Huh, I. L...  2017.10.11 85
126 Rate-dependent isotropic‒kinematic hardening model in tension‒compression of TRIP and TWIP steel sheets file Geunsu Joo, Hoon Huh  2017.10.11 83
125 Evaluation of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions with a servo-hydraulic high speed testing machine file Junbeom Kwon, Hoon Hu...  2017.06.07 353
124 Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates file Geunsu Joo, Hoon Huh,...  2017.06.07 278
123 Evaluation of the effect of the strain rate on the tensile properties of carbon–epoxy composite laminates file J. Kwon, J. Choi, H. ...  2017.06.07 237
122 Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates file N. Park, M. Park, J.B...  2017.06.07 286
121 Fracture-based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming file N. Park, H. Huh, S.J....  2017.06.07 239
120 Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet file M.K. Choi, H. Huh, an...  2017.06.07 244
» Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation file Keunhwan Pack, Kwangh...  2015.12.01 1690
118 Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre-Strain file S. B. Kim and H. Huh  2015.11.18 1353
117 Anisotropy Effect on the Fracture Model of DP980 Sheets Considering the Loading Path file N. PARK, H. HUH, J. B...  2015.06.15 1828
116 Evaluation of dynamic hardening models for BCC, FCC,and HCP metals at a wide range of strain rates Hoon Huh, Kwanghyun A...  2015.02.16 2332
115 Specimen and Grain Size Effects of Al1100 on Strain and Strain Rate Hardening at Various Strain Rates for Al1100 file Junbeom Kwon, Hoon Hu...  2014.08.20 2856
114 Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain rates file Chunghee Park, Hoon H...  2014.04.11 3830
113 New pseudo-elastic model for polymer-bonded explosive simulants considering the Mullins effect file Kee Sun Yeom Sehwan J...  2013.12.10 4086
112 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.12.10 3527
111 Strain Hardening Model of Pure Titanium Considering Effects of Deformation Twinning file Kwanghyun Ahn, Hoon H...  2013.09.16 4079
110 Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation file Yanshan Lou Hoon Huh  2013.04.08 5881
109 Effect of strain rate on plastic anisotropy of advanced high strength steel sheets file Jeehyang Huh Hoon Huh...  2013.04.02 3879