저자명 M. K. Choi, H. Huh, M. H. Seo, Y. Kang 
Name ICHSF 2016 
Place Dortmund, Germany 
Year 2016 

This paper proposes a design method of the tool coil by topology optimization for the electromagnetic sharp edge forming process. Topology optimization is an approach that optimizes material configuration in a given domain to meet the design requirements. The design problem for the tool coil is defined as enhancing efficiency of the forming process and optimization problem is set to be maximization of the Lorentz force induced on the tool coil. A new topology optimization formulation based on the numerical methods for electromagnetism using FEM and BEM is developed for maximization of the Lorentz force. Optimum design of the tool coil is obtained by the topology optimization using the element density approach. The optimized result is compared with other coils which have different configurations to show the effectiveness of the proposed method. The idea of applying topology optimization to the design of the tool coil is successful and this formulation deals effectively for the optimization problems

번호 제목 저자명 날짜 조회 수
176 Characterization of Hardening Behavior at Ultra-High Strain Rate, Large Strain, and High Temperature file MingJun Piao, Hoon Hu...  2017.10.11 103
175 Validation of the Thermal Softening Effect at a Wide Range of Strain Rates by Using the Taylor Impact Test file MingJun Piao, Hoon Hu...  2017.10.11 94
174 Modeling of rate-dependent hardening behaviors of the TWIP980 steel sheet in tension and compression file Geunsu Joo, Hoon Huh  2017.10.11 69
173 Effect of Pre-strain on Tensile Properties of Al5052-H32 under an Electropulsing Condition M. Kim, J. Song, H. Huh  2017.10.11 78
172 Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion file N. Park, H. Huh, J. Yoon  2017.10.11 82
171 Investigation of the hardening behavior of sheet metals at intermediate strain rates considering the pre-strain M. Kim and H. Huh  2017.06.07 286
170 Tensile properties of a tempered glass plate at the quasi-static state M. Kim, H. Huh, E. Ju...  2017.06.07 195
169 A Method for Evaluation of Tensile Properties of a Nugget Zone in a Spot-Welded Joint Considering the Strain Rate N. Park, M. Park, and...  2017.06.07 207
168 Prediction of the onset of fracture of DP980 steel 1.2t under typical loading conditions based on associated and non-associated flow rules file N. Park and H. Huh  2017.06.07 208
167 Evaluation of tensile properties of heat-treated AISI4340 steel at various strain rates file N. Park, S.J. Lim, an...  2017.06.07 203
166 Prediction of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions file Junbeom Kwon, Hoon Hu...  2017.06.07 201
165 Rate-dependent Material Parameters of the Combined Isotropic/kinematic Hardening Model for the TRIP980 steel sheet file Geunsu Joo, Hoon Huh  2017.06.07 209
164 RATE-DEPENDENT HARDENING BEHAVIORS OF ULTRA-HIGH STRENGTH STEEL SHEETS UNDER IN-PLANE TENSION/COMPRESSION file Hoon Huh, Geunsu Joo  2017.06.07 225
163 ASYMMETRIC MECHANICAL PROPERTIES OF TRIP980 AND TWIP980 STEEL SHEETS AT VARIOUS STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 208
162 AN IMPROVED DEVICE FOR THE TENSION/COMPRESSION TEST AT INTERMEDIATE STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 209
161 Tensile Properties of Auto-body Plastic with Various Strain Rates for FEM by Using The DIC Method and The Force Equilibrium Grid Method file Jesung Yoo, Hoon Huh,...  2017.06.07 198
160 Tensile Properties of Stitched Fabric Composite Manufactured by RTM Considering Various Strain Rates and Stacking Sequences file Jesung Yoo, Hoon Huh,...  2017.06.07 203
» Efficient coil design by electromagnetic topology optimization for electromagnetic sharp edge forming of DP980 steel sheet file M. K. Choi, H. Huh, M...  2016.05.25 1439
158 Fracture-based forming limit criteria for anisotropic materials in sheet metal forming file Namsu Park, Hoon Huh  2016.02.17 1994
157 The tensile properties of CFRP laminate with various stacking sequences considering the strain rate effect at intermediate strain rate file Junbeom Kwon, Hoon Huh  2015.08.08 1685