저자명 Jesung Yoo, Hoon Huh, Namsu Park 
Name Jesung Yoo 
Place Seoul, South Korea 
Year 2016 

This paper is concerned with tensile properties of auto-body plastic by using the DIC(Digital Image Correlation) method and the FEGM(Force Equilibrium Grid Method) with various strain rates ranging from 0.001/sec to 100/sec. In recent years, the amount of auto-body plastic used is being increasing for the light weight, crashworthiness and its good formability. Due to non-uniform elongation at gauge section during tensile test of auto-body plastic, it is important to analyze material properties by using the FEGM. Although the FEGM is a good solution which compensates characteristics of non-uniform deformation on auto-body plastic, it is complicated to conduct the FEGM by analysis of grids on each part of the gauge section. The DIC is alternative method to resolve the difficulty of the FEGM. The DIC method is technique to acquire strain distribution on the gauge section by capturing image series of irregular speckle pattern on the gauge section of the auto-body plastic specimen during tensile test.
High speed tensile test is conducted by using HSMTM(High Speed Material Testing Machine) at KAIST. Image series of the gauge section is captured by using high speed camera with various strain rates. Analysis of strain distribution at each image series is calculated for applying the FEGM. Obtained material properties of auto-body plastic enable FE analysis of auto-body plastic to be more accurate.

Keywords: DIC method, Force equilibrium grid method, Auto-body plastic, High speed tensile test, Strain rate sensitivity

번호 제목 저자명 날짜 조회 수
176 Characterization of Hardening Behavior at Ultra-High Strain Rate, Large Strain, and High Temperature file MingJun Piao, Hoon Hu...  2017.10.11 103
175 Validation of the Thermal Softening Effect at a Wide Range of Strain Rates by Using the Taylor Impact Test file MingJun Piao, Hoon Hu...  2017.10.11 94
174 Modeling of rate-dependent hardening behaviors of the TWIP980 steel sheet in tension and compression file Geunsu Joo, Hoon Huh  2017.10.11 69
173 Effect of Pre-strain on Tensile Properties of Al5052-H32 under an Electropulsing Condition M. Kim, J. Song, H. Huh  2017.10.11 78
172 Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion file N. Park, H. Huh, J. Yoon  2017.10.11 82
171 Investigation of the hardening behavior of sheet metals at intermediate strain rates considering the pre-strain M. Kim and H. Huh  2017.06.07 286
170 Tensile properties of a tempered glass plate at the quasi-static state M. Kim, H. Huh, E. Ju...  2017.06.07 195
169 A Method for Evaluation of Tensile Properties of a Nugget Zone in a Spot-Welded Joint Considering the Strain Rate N. Park, M. Park, and...  2017.06.07 207
168 Prediction of the onset of fracture of DP980 steel 1.2t under typical loading conditions based on associated and non-associated flow rules file N. Park and H. Huh  2017.06.07 208
167 Evaluation of tensile properties of heat-treated AISI4340 steel at various strain rates file N. Park, S.J. Lim, an...  2017.06.07 203
166 Prediction of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions file Junbeom Kwon, Hoon Hu...  2017.06.07 201
165 Rate-dependent Material Parameters of the Combined Isotropic/kinematic Hardening Model for the TRIP980 steel sheet file Geunsu Joo, Hoon Huh  2017.06.07 209
164 RATE-DEPENDENT HARDENING BEHAVIORS OF ULTRA-HIGH STRENGTH STEEL SHEETS UNDER IN-PLANE TENSION/COMPRESSION file Hoon Huh, Geunsu Joo  2017.06.07 226
163 ASYMMETRIC MECHANICAL PROPERTIES OF TRIP980 AND TWIP980 STEEL SHEETS AT VARIOUS STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 208
162 AN IMPROVED DEVICE FOR THE TENSION/COMPRESSION TEST AT INTERMEDIATE STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 209
» Tensile Properties of Auto-body Plastic with Various Strain Rates for FEM by Using The DIC Method and The Force Equilibrium Grid Method file Jesung Yoo, Hoon Huh,...  2017.06.07 199
160 Tensile Properties of Stitched Fabric Composite Manufactured by RTM Considering Various Strain Rates and Stacking Sequences file Jesung Yoo, Hoon Huh,...  2017.06.07 203
159 Efficient coil design by electromagnetic topology optimization for electromagnetic sharp edge forming of DP980 steel sheet file M. K. Choi, H. Huh, M...  2016.05.25 1439
158 Fracture-based forming limit criteria for anisotropic materials in sheet metal forming file Namsu Park, Hoon Huh  2016.02.17 1994
157 The tensile properties of CFRP laminate with various stacking sequences considering the strain rate effect at intermediate strain rate file Junbeom Kwon, Hoon Huh  2015.08.08 1685