HOME > Publications > International Conferences

AN IMPROVED DEVICE FOR THE TENSION/COMPRESSION TEST AT INTERMEDIATE STRAIN RATES

2017.06.07 16:13

csmd 조회 수:1756

저자명 Geunsu Joo, Hoon Huh 
Name Plasticity 2016 
Place Big Island, Hawaii, U.S.A. 
Year 2016.01.03 ~ 09 
An improved device for the tension/compression test of sheet metals at intermediate strain rates with a hydraulic material testing machine. The device is designed to measure reliable load data without fluctuation of the load according to the fundamental mode of the device at intermediate strain rates. Tension and compression tests are performed for TRIP980 and TWIP980 steel sheets at various strain rates ranging from 0.001 s−1 to 100 s−1. From the test results, rate dependent hardening behaviors are observed under compression as well as tension. 
이 게시물을
목록
목록
번호 제목 저자명 날짜 조회 수
176 Characterization of Hardening Behavior at Ultra-High Strain Rate, Large Strain, and High Temperature file MingJun Piao, Hoon Hu...  2017.10.11 1822
175 Validation of the Thermal Softening Effect at a Wide Range of Strain Rates by Using the Taylor Impact Test file MingJun Piao, Hoon Hu...  2017.10.11 1853
174 Modeling of rate-dependent hardening behaviors of the TWIP980 steel sheet in tension and compression file Geunsu Joo, Hoon Huh  2017.10.11 1611
173 Effect of Pre-strain on Tensile Properties of Al5052-H32 under an Electropulsing Condition M. Kim, J. Song, H. Huh  2017.10.11 1346
172 Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion file N. Park, H. Huh, J. Yoon  2017.10.11 1458
171 Investigation of the hardening behavior of sheet metals at intermediate strain rates considering the pre-strain M. Kim and H. Huh  2017.06.07 1637
170 Tensile properties of a tempered glass plate at the quasi-static state M. Kim, H. Huh, E. Ju...  2017.06.07 1526
169 A Method for Evaluation of Tensile Properties of a Nugget Zone in a Spot-Welded Joint Considering the Strain Rate N. Park, M. Park, and...  2017.06.07 1484
168 Prediction of the onset of fracture of DP980 steel 1.2t under typical loading conditions based on associated and non-associated flow rules file N. Park and H. Huh  2017.06.07 1498
167 Evaluation of tensile properties of heat-treated AISI4340 steel at various strain rates file N. Park, S.J. Lim, an...  2017.06.07 1499
166 Prediction of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions file Junbeom Kwon, Hoon Hu...  2017.06.07 1622
165 Rate-dependent Material Parameters of the Combined Isotropic/kinematic Hardening Model for the TRIP980 steel sheet file Geunsu Joo, Hoon Huh  2017.06.07 1501
164 RATE-DEPENDENT HARDENING BEHAVIORS OF ULTRA-HIGH STRENGTH STEEL SHEETS UNDER IN-PLANE TENSION/COMPRESSION file Hoon Huh, Geunsu Joo  2017.06.07 1713
163 ASYMMETRIC MECHANICAL PROPERTIES OF TRIP980 AND TWIP980 STEEL SHEETS AT VARIOUS STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 1615
» AN IMPROVED DEVICE FOR THE TENSION/COMPRESSION TEST AT INTERMEDIATE STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 1756
161 Tensile Properties of Auto-body Plastic with Various Strain Rates for FEM by Using The DIC Method and The Force Equilibrium Grid Method file Jesung Yoo, Hoon Huh,...  2017.06.07 1565
160 Tensile Properties of Stitched Fabric Composite Manufactured by RTM Considering Various Strain Rates and Stacking Sequences file Jesung Yoo, Hoon Huh,...  2017.06.07 1487
159 Efficient coil design by electromagnetic topology optimization for electromagnetic sharp edge forming of DP980 steel sheet file M. K. Choi, H. Huh, M...  2016.05.25 2844
158 Fracture-based forming limit criteria for anisotropic materials in sheet metal forming file Namsu Park, Hoon Huh  2016.02.17 3354
157 The tensile properties of CFRP laminate with various stacking sequences considering the strain rate effect at intermediate strain rate file Junbeom Kwon, Hoon Huh  2015.08.08 3139
쓰기
태그