저자명 Geunsu Joo, Hoon Huh 
Name AEPA 2016 
Place Hiroshima, Japan 
Year 2016.12.04 ~ 08 

This paper is concerned with rate-dependent hardening behaviors of the TRIP980 steel sheet. In sheet metal forming, sheet metals experiences complicated loading at various strain rates. In order to predict deformed shape in sheet metal forming, accurate material properties and an appropriate constitutive model in numerical simulation are important to consider reverse loading and various strain rates simultaneously.

 This paper deals with rate-dependent material parameters of the isotropic/kinematic hardening model. Tension/compression tests of the TRIP980 steel sheet are performed with a newly developed experimental technique at various strain rates ranging from 0.001 to 100 s1. Tension/compression hardening curves of the TRIP980 steel sheet are approximated by the Chun et al. model at each strain rate condition respectively. From acquired material parameters, rate dependencies of tension/compression hardening behaviors are investigated. 

번호 제목 저자명 날짜 조회 수
176 TOPOLOGY OPTIMIZATION OF PLASTIC STRUCTURES USING FINITE ELEMENT LIMIT ANALYSIS file Jongsup Lee, Hoon Huh  2009.07.30 7844
175 Compressive Characteristics of PBX Simulant with the Variation of the Strain Rate file Chunghee Park, Sehwan...  2012.09.21 7701
174 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.02.06 7583
173 Dynamic Failure Characteristics of Electric Resistance Spot Welds in DP Steel Sheets [2] file Jiwoong Ha Hoon Huh J...  2012.12.10 7169
172 Variational Time Integrators for Handling Discontinuous Interfaces in Solids file S. J. Lim S. S. Cho H...  2012.03.20 6570
171 Buffer Stopper Using Progressive Compression Process for Crash Energy Absorption of a Railway Vehicle Kwanghyun Ahn Hoon Hu...  2011.12.22 6479
170 MECHANICAL CHARACTERISTICS OF PBX SIMULANT CONSIDERING STRAIN RATE EFFECT file Chunghee Park Sehwan ...  2011.07.04 6459
169 Effect of helicity on the buckling behavior of single-wall carbon nanotubes file Jeehyang Huh Hoon Huh  2008.12.15 6412
168 Evaluation of Dynamic Hardening Models for Metallic Materials at Wide Range of Strain Rates file Hoon Huh Kwanghyun Ah...  2012.09.26 6243
167 Micro-Tensile Tests of Aluminum Thin Foil with the Variation of Strain Rate file J.B. Kwon J. Huh H. H...  2012.06.19 6169
166 Material Properties of PBX Simulant Considering Strain Rate Effect file Chunghee Park Sehwan ...  2010.12.22 6030
165 Development of Buffer Stopper Using Progressive Compression Process for Crash Energy Absorption of a Railway Vehicle file Kwanghyun Ahn Hoon Hu...  2012.12.10 6030
164 Quantification of Material Properties of Structural Materials for Warhead at Various Strain Rates file Kwanghyun Ahn Hoon Hu...  2012.09.26 5971
163 Effect of Strain Rate on the Material Characteristics of a Fragment-Simulating Warhead and an Armor Plate file Jiwoong Ha Hoon Huh K...  2012.06.27 5909
162 Material Behaviors of PBX Simulant with Various Strain Rates [1] file Chunghee Park Sehwan ...  2013.01.08 5886
161 Ductile fracture of dual phase steel: mechanisms, modeling, prediction and prospective applications file Yanshan Lou, Hoon Huh  2013.02.01 5844
160 Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function file Yanshan Lou Gihyun Ba...  2010.07.14 5656
159 Prediction of forming limit diagrams of DP590 steel based on the M-K model with experimental verification file Yanshan Lou Seokbong ...  2010.12.27 5632
158 Development and investigation of nonlinear shell elements with drilling degree of freedom file H. W. Lee H. Huh  2005.11.29 5589
157 Rate-dependent two-surface model for cyclic hardening behaviour of advanced high strength steel sheets file Jeehyang HUh Hoon Huh...  2012.11.06 5546