저자명 Junbeom Kwon, Hoon Huh, Jae-song Kimor 
Journal Metals and Materials International 
Volume  
Number  
Pages  
year 2016 
This paper is concerned with the construction of an empirical model of the Ductile-to-Brittle Transition Temperature (DBTT) for 3.4 % silicon steel based on tensile test results at strain rates ranging from 0.001 s‒1 to 100 s‒1. Dynamic tensile tests are conducted using an in-house servo hydraulic tensile test machine at strain rates of 1 s‒1, 10 s‒1, and 100 s‒1 and quasi-static tensile tests are conducted using Instron 4206 at strain rates of 0.001 s‒1 and 0.01 s‒1 with an environmental chamber. Fracture elongations are measured by a DIC method during all tests using the high-speed camera for accurate measurement. The DBTT of 3.4 % silicon steel is presented in terms of fracture strain with the variation of the temperature and the strain rate. It is demonstrated from the test results that the DBTT increases as the strain rate increases. An empirical model of the DBTT is constructed in terms of strain rate, temperature and fracture elongation. The parameters of the empirical model are calculated from experimental results obtained at various temperatures and strain rates.
번호 제목 저자명 날짜 조회 수
128 Characterization of Hardening Behaviors of 4130 Steel, OFHC Copper, Ti6Al4V Alloy Considering Ultra-High Strain Rates and high Temperatures file M. Piao, H. Huh, I. L...  2017.10.11 83
127 Characterization of flow stress at ultra-high strain rates by proper extrapolation with Taylor impact tests file M. Piao, H. Huh, I. L...  2017.10.11 75
126 Rate-dependent isotropic‒kinematic hardening model in tension‒compression of TRIP and TWIP steel sheets file Geunsu Joo, Hoon Huh  2017.10.11 76
» Evaluation of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions with a servo-hydraulic high speed testing machine file Junbeom Kwon, Hoon Hu...  2017.06.07 347
124 Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates file Geunsu Joo, Hoon Huh,...  2017.06.07 269
123 Evaluation of the effect of the strain rate on the tensile properties of carbon–epoxy composite laminates file J. Kwon, J. Choi, H. ...  2017.06.07 230
122 Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates file N. Park, M. Park, J.B...  2017.06.07 272
121 Fracture-based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming file N. Park, H. Huh, S.J....  2017.06.07 236
120 Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet file M.K. Choi, H. Huh, an...  2017.06.07 236
119 Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation file Keunhwan Pack, Kwangh...  2015.12.01 1687
118 Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre-Strain file S. B. Kim and H. Huh  2015.11.18 1340
117 Anisotropy Effect on the Fracture Model of DP980 Sheets Considering the Loading Path file N. PARK, H. HUH, J. B...  2015.06.15 1822
116 Evaluation of dynamic hardening models for BCC, FCC,and HCP metals at a wide range of strain rates Hoon Huh, Kwanghyun A...  2015.02.16 2329
115 Specimen and Grain Size Effects of Al1100 on Strain and Strain Rate Hardening at Various Strain Rates for Al1100 file Junbeom Kwon, Hoon Hu...  2014.08.20 2848
114 Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain rates file Chunghee Park, Hoon H...  2014.04.11 3821
113 New pseudo-elastic model for polymer-bonded explosive simulants considering the Mullins effect file Kee Sun Yeom Sehwan J...  2013.12.10 4083
112 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.12.10 3521
111 Strain Hardening Model of Pure Titanium Considering Effects of Deformation Twinning file Kwanghyun Ahn, Hoon H...  2013.09.16 4070
110 Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation file Yanshan Lou Hoon Huh  2013.04.08 5872
109 Effect of strain rate on plastic anisotropy of advanced high strength steel sheets file Jeehyang Huh Hoon Huh...  2013.04.02 3874