저자명 Jeehyang Huh Hoon Huh 
Name Proc. of 2012 KSTP spring conference 
Year 2012 
page 183-186 

This paper investigates the effect of strain rate on the yield surface evolution of SPCC steel sheet. Uniaxial tensile tests were  carried  out  for SPCC steel  sheets  at  the  strain  rate  ranged  from  0.001 s -1 to  100 s -1 to obtain  flow stresses and r-values  at  various  loading  angles.  Based  on  the  experimental data, yield  surfaces  of  SPCC  were  constructed  at  different strain  rates  with  Hill48  yield  function.  Subsequent  yield  surfaces  were  constructed  and  compared with the initial  yield surfaces to investigate the strain rate effect on the yield surface evolution. It was found that the strain rate sensitivity on the anisotropy of the yield surface decreases as the deformation goes on.

번호 제목 저자명 날짜 조회 수
256 Dynamic Hardening Equation for Metallic Materials with the Variation of Crystalline Structures file Kwanghyun Ahn Hoon Hu...  2012.06.07 8921
255 Effect of the Measurement Uncertaintty of Dynamic Tensile Properties on Dynamic Buckling Analysis of a Circular Tube file Sehwan Jeong Hoon Huh  2012.08.06 8366
» Evolution of yield surface of SPCC steel sheet at different strain rates file Jeehyang Huh Hoon Huh  2012.05.29 7907
253 Investigation of springback behavior of DP780 steel sheets [1] file M.K.Choi H.Huh  2012.06.08 7483
252 Evaluation of Ductile Fracture Criteria in Full Stress States file Yanshan Lou, Mingjun...  2013.02.01 6760
251 A New Tangent Stiffness for Anisotropic Elasto-Viscoplastic Analysis of Polycrystalline Deformations file J. H. Yoon H. Huh Y. ...  2006.12.11 6501
250 User Defined Material Model in LS-DYNA for Numerical Simulations of PBX Simulants file Chunghee Park Hoon Hu...  2013.08.30 6346
249 Effect of Tensile Speed on the Failure Load of Laser Welding under Combined Loading Conditions [2] file Jiwoong Ha Hoon Huh S...  2012.06.27 6332
248 Prediction of fracture in a hub-hole expansion with a defected-edge model file J. S. Lee H. Huh  2005.11.29 6140
247 Dynamic Material Properties of an Armor Plate Material for an Armored Vehicle file Jiwoong Ha Kwanghyun ...  2012.06.27 6135
246 Characteristics Analysis of the High Performance Damper-Strut Module file Youn-Ki Ko Jung-Han S...  2006.06.14 6113
245 Effect of Deformation Twinning on Strain Hardening in Titanium file Kwanghyun Ahn Hoon Hu...  2012.06.04 5819
244 Application of Ductile Fracture Criteria for the FLD Prediction of Steel Sheets file Yanshan Lou Soekbong ...  2010.12.27 5761
243 Development of Braking System for Railway Vehicle Using Progressive Compression Process file Kwanghyun Ahn Youn Ki...  2011.12.15 5701
242 Forming Limit Diagram of Advanced High Strength Steel Sheets for High-Speed Sheet Metal Forming file S. J. Lim, S. B. Kim...  2012.05.29 5681
241 Quasi-Static Failure of Spot Welds of AHSS under Combined Loading Conditions file Jiwoong Ha Hoon Huh H...  2011.04.01 5678
240 Finite Element Stress Analysis of the Tire Contact Problem file H. Huh Y. K. Kwak Y. ...  2005.11.29 5619
239 Railway Buffer Stop Using Progressive Compression Process file Kwanghyun Ahn Youn Ki...  2010.12.24 5371
238 Anisotropy Effect on the Fracture Strain of DP980 Sheets [1] file Namsu Park, Sung Jun ...  2013.08.29 5329
237 Microscopic Investigation of the Strain Rate Hardening for Metals file J. H. Yoon H. Huh C. ...  2007.10.14 5316