Material Behaviors of PBX Simulant with Various Strain Rates

2013.01.08 10:33

csmd 조회 수:7746

저자명 Chunghee Park Sehwan Jeong Hoon Huh Jungsu Park 
Name AEPA2012 
Place Singapore 
Year 2012 
This paper is concerned with the material behaviors of PBX (Polymer Bonded eXplosive) simulant at various strain rates ranging from 0.0001/sec to 3150/sec. Material behaviors of PBX at the high strain rates are important in the prediction of deformation modes of PBX in a warhead which undergoes severe impact loading. Inert PBX stimulant which has analogous material behaviors with PBX was utilized for material tests due to safety issues. Uniaxial compressive tests at quasi-static and intermediate strain rates were conducted with cylindrical specimen using a dynamic materials testing machine, INSTRON 8801. Uniaxial compressive tests at high strain rates ranging from 1200/sec to 3150/sec were conducted using a split Hopkinson pressure bar. Deformation behaviors were investigated using captured images obtained from a high-speed camera. The strain hardening behaviors of PBX simulant were formulated by proposed strain rate-dependent strain hardening model.
번호 제목 저자명 날짜 조회 수
176 A General Algorithm for Limit Solutions of Plane Stress Problems H. Huh W. H. Yang  2005.11.29 6039
175 Elasto-Plastic Finite Element Analysis with Directional Reduced Integration in Sheet Metal Forming Process file H. Huh S. S. Han D. Y...  2005.11.29 6452
174 Superplastic Sheet Forming Analysis by the Finite Element Method with Directional Reduced Integration file H. Huh S. S. Han  2005.11.29 5837
173 Experimental Verification of the Superplastic Sheet Metal Forming Analysis by the Finite Element Method file H. Huh S. S. Han J. S...  2005.11.29 5047
172 Rational Finite Element Formulation for a Membrane Element in Sheet Metal Forming Analysis file H. Huh S. S. Han D. Y...  2005.11.29 5212
171 Finite Element Stress Analysis for Design of Optical Fiber Connectors with Elastomeric Ferrules file H. Huh C. H. Lee M. Y...  2005.11.29 6021
170 Collapse Load Calculation for Thick-walled Tubes with Defect by Finite Element Limit Analysis file H. Huh K. S. Lee  2005.11.29 5922
169 Numerical Simulation of Rectangular Cup Drawing Processes with Drawbeads file H. Huh S. S. Han  2005.11.29 5538
168 Load-carrying Capacity of Nuclear Reactors under Internal Pressure considering Work-hardening Effect file H. Huh H. S. Kim H. D...  2005.11.29 6399
167 Parameter Study for Optimum Design of Sheet Metal Forming Processes with Inverse Finite Element Analysis file H. Huh C. H. Lee  2005.11.29 4191
166 Development of CALF for Thermal and Failure Analysis of RPV Lower Head file H. Huh H. S. Kim H. ...  2005.11.29 6238
165 The Effect of Aged Materials on the Autoclave Cure of Thick Composites file E. A. Kempner H. T. H...  2005.11.29 5768
164 Process Parameter Design with Finite Element Analysis in Sheet Metal Forming Processes file S. H. Kim C. H. Lee H...  2005.11.29 4999
163 Collapse Analysis of Space-framed Vehicle Models by Finite Element Limit Analysis file H. S. Kim H. Huh  2005.11.29 5285
162 Identificatoin of Dynamic Behavior of Sheet Metals for an Auto-body with Tension Split Hopkinson Bar file W. J. Kang S. S. Cho ...  2005.11.29 5135
161 Simulation of Three Dimensional Superplastic Blow Forming with a Modified Membrane Finite Element Method file K. S. Lee H. Huh  2005.11.29 4929
160 Estimation of Shape and Non-shape Parameters in Sheet Metal Forming Processes with Inverse Finite Element Analysis file C. H. Lee H. Huh  2005.11.29 4780
159 Thermal and Deformation Analysis for Optimization of the LOM Process with Composite Materials file H. Huh H. T. Hahn  2005.11.29 5604
158 Optimum Process Parameter Determination in Sheet Metal Forming Process file S. H. Kim H. Huh A. T...  2005.11.29 4032
157 Plastic Buckling Simulation of Tubular Structures by Finite Element Limit Analysis file H. Huh H. S. Kim  2005.11.29 5551