저자명 MingJun Piao, Chunghee Park, Hoon Huh, and Ikjin Lee 
Name MingJun Piao 
Place Kaohsiung, Taiwan 
Year 2014 
This paper is concerned with the hardening behavior of 4340 steel at high strain rates from10^4 /s to 10^6 /s. Tension tests were conducted using Instron 5583, HSMTM and SHPB testingmachines at a wide range of strain rate from 10^-3 /s to 10^3 /s. Three different impact velocities were performed for the Taylor impact tests to evaluate the reliability of Johnson–Cook model, modifiedJohnson–Cook model, modified Khan–Huang model, and Lim–Huh model at high strain rates for 4340 steel.
번호 제목 저자명 날짜 조회 수
171 Investigation of the hardening behavior of sheet metals at intermediate strain rates considering the pre-strain M. Kim and H. Huh  2017.06.07 196
170 Tensile properties of a tempered glass plate at the quasi-static state M. Kim, H. Huh, E. Ju...  2017.06.07 118
169 A Method for Evaluation of Tensile Properties of a Nugget Zone in a Spot-Welded Joint Considering the Strain Rate N. Park, M. Park, and...  2017.06.07 116
168 Prediction of the onset of fracture of DP980 steel 1.2t under typical loading conditions based on associated and non-associated flow rules file N. Park and H. Huh  2017.06.07 125
167 Evaluation of tensile properties of heat-treated AISI4340 steel at various strain rates file N. Park, S.J. Lim, an...  2017.06.07 123
166 Prediction of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions file Junbeom Kwon, Hoon Hu...  2017.06.07 118
165 Rate-dependent Material Parameters of the Combined Isotropic/kinematic Hardening Model for the TRIP980 steel sheet file Geunsu Joo, Hoon Huh  2017.06.07 119
164 RATE-DEPENDENT HARDENING BEHAVIORS OF ULTRA-HIGH STRENGTH STEEL SHEETS UNDER IN-PLANE TENSION/COMPRESSION file Hoon Huh, Geunsu Joo  2017.06.07 128
163 ASYMMETRIC MECHANICAL PROPERTIES OF TRIP980 AND TWIP980 STEEL SHEETS AT VARIOUS STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 120
162 AN IMPROVED DEVICE FOR THE TENSION/COMPRESSION TEST AT INTERMEDIATE STRAIN RATES file Geunsu Joo, Hoon Huh  2017.06.07 125
161 Tensile Properties of Auto-body Plastic with Various Strain Rates for FEM by Using The DIC Method and The Force Equilibrium Grid Method file Jesung Yoo, Hoon Huh,...  2017.06.07 123
160 Tensile Properties of Stitched Fabric Composite Manufactured by RTM Considering Various Strain Rates and Stacking Sequences file Jesung Yoo, Hoon Huh,...  2017.06.07 127
159 Efficient coil design by electromagnetic topology optimization for electromagnetic sharp edge forming of DP980 steel sheet file M. K. Choi, H. Huh, M...  2016.05.25 1343
158 Fracture-based forming limit criteria for anisotropic materials in sheet metal forming file Namsu Park, Hoon Huh  2016.02.17 1912
157 The tensile properties of CFRP laminate with various stacking sequences considering the strain rate effect at intermediate strain rate file Junbeom Kwon, Hoon Huh  2015.08.08 1606
156 An improved technique for reducing the load ringing phenomenon in tensile tests at high strain rates file J.B. Kwon, H.Huh, C.N...  2015.08.08 1546
» Validation of Dynamic Hardening Models With Taylor Impact Tests at High Strain Rates file MingJun Piao, Chunghe...  2015.06.15 1785
154 Roof Structure Design and Evaluation for Improvement of Roof Strength of Three-Wheel Vehicles file Jesung Yoo, Junbeom K...  2015.06.15 1746
153 A Newly Developed Clamping Device for the Tension/compression Test at various Strain Rates file Geunsu JOO, Min Kuk C...  2014.12.23 2378
152 Effect of punch speed on the amount of springback in U-bending process of auto-body steel sheets Min Kuk Choi, Hoon Huh  2014.10.30 3098