번호 제목 저자명 날짜 조회 수
76 Effect of the Draw-bead and Blanking Holding Force on the Sheet Metal Forming Process file H. Huh, J. H. Song, ...  2005.12.13 4889
75 Measurement of R-values at Intermediate Strain Rates using a Digital Speckle Extensometry file J. Huh Y.J. Kim H. Huh  2011.07.04 4897
74 Multi-stage Inverse Analysis of Elliptic Cup Drawing with the Large Aspect Ratio file H. Huh S. H. Kim S. H...  2005.11.29 4905
73 Simulation of Three Dimensional Superplastic Blow Forming with a Modified Membrane Finite Element Method file K. S. Lee H. Huh  2005.11.29 4929
72 Effects of forming speed on the springback using finite element methods file Yanshan Lou, Jin Sun...  2009.12.03 4945
71 A Method For Treating Temporal And Spatial High Gradient Phenomena In The Dynamics Of Solids K.C. Park S.j. Lim H....  2011.08.03 4946
70 Evaluation of Crash Energy Absorption Capacity of a Tearing Tube file Younki Ko Kwanghyun A...  2010.07.06 4954
69 Crash Tests of Tension Bolts in Light Safety Collision Devices file J.S. Kim, H. Huh T....  2008.12.15 4959
68 Effect of Strain Rate on Mechanical Response of PBX Simulant file Chunghee Park, Hoon H...  2013.08.30 4964
67 Standard Uncertainty Evaluation for Dynamic Tensile Properties of Auto-body Steel Sheets Sehwan Jeong Hoon Hu...  2011.12.13 4978
66 Process Parameter Design with Finite Element Analysis in Sheet Metal Forming Processes file S. H. Kim C. H. Lee H...  2005.11.29 4999
65 Anisotropy Effect on the Stress-Based Fracture Forming Limit Diagram Using a Modified Lou–Huh Ductile Fracture Criterion file Namsu Park and Hoon Huh  2014.01.20 5019
64 Cyclic tension/compression test of auto-bod steel sheets with the variation of the strain rate file G. H. Bae H. Huh  2011.07.04 5033
63 Optimization of a Roller Levelling Process for Al7001T9 Pipes with Finite Element Analysis and Taguchi Method file H. Huh J. H. Heo H. ...  2005.11.29 5037
62 Experimental Verification of the Superplastic Sheet Metal Forming Analysis by the Finite Element Method file H. Huh S. S. Han J. S...  2005.11.29 5047
61 Membrane Rebar Element considering Rotation of Reinforced Fibers for an Air Spring file Sehwan Jeong, Hoon H...  2009.07.30 5134
60 Identificatoin of Dynamic Behavior of Sheet Metals for an Auto-body with Tension Split Hopkinson Bar file W. J. Kang S. S. Cho ...  2005.11.29 5135
59 Strain-Rate Dependent R-Values of Advanced High Strength Steel Sheets file J. Huh H. HUh  2011.07.04 5158
58 Effect of Tensile Speed on the Failure Load of Laser Welding under Combined Loading Conditions file Jiwoong Ha Hoon Huh K...  2012.12.10 5190
57 Rational Finite Element Formulation for a Membrane Element in Sheet Metal Forming Analysis file H. Huh S. S. Han D. Y...  2005.11.29 5212