저자명 Junbeom Kwon, Jaeyoung Choi and Hoon Huh 
Name KSAE 2013 Annual Conference 
Year 2013 
page 1639-1648 

This paper is concerned with the evaluation and prediction of the effect of the strain rate on the tensile properties of CFRP. Tensile tests of CFRP laminates were conducted at various strain rates ranged from 0.001/s to 100/s to measure varieties of the elastic modulus and ultimate tensile strength depending on strain rate. To enhance the accuracy of the strain measurement, Digital Image Correlation (DIC) method was employed to measure the axial strain of specimens using a high-speed camera and the ARAMIS software program. The tensile properties of the unidirectional CFRP laminates stacked with [0]4, [90]4 and [45]4 have been obtained to predict the elastic modulus of the CFRP with various laminate stacking sequences. The prediction model of the elastic modulus of CFRP laminates is suggested by using the laminate theory and the tensile properties of the unidirectional CFRP laminates. The prediction model was also compared with the static and dynamic tensile test results of the CFRP laminates stacked with [0/90/90/0], [45/-45/-45/45] and [0/45/-45/90].

번호 제목 저자명 날짜 조회 수
256 Evaluation of Dynamic Hardening Models With Taylor Impact Tests at Ultra High Strain Rates For 4340 Steel file M. J. Piao, I. Lee, H...  2017.10.11 93
255 Tension/compression Test of Giga-grade Steel Sheets Considering Intermediate Strain Rates file Geunsu Joo, Hoon Huh  2017.06.07 181
254 Evaluation of Measurement Uncertainty of Dynamic Tensile Properties M.K. Choi, H. Choe, H...  2017.06.07 168
253 Evaluation of Tensile Properties of Auto-body Plastics Using DIC Method and Force Equilibrium Grid Method file Jesung Yoo, Park Nams...  2017.06.07 174
252 Modeling of a Ductile Fracture Model Considering the Anisotropy of Sheet Metal file N. Park and H. Huh  2015.12.28 2059
251 Evaluation of Dynamic Hardening Models With Taylor Impact Tests at Ultra High Strain Rates For 4340 Steel file M.J. Piao, I. Lee, H....  2015.06.15 2228
250 Prediction of Fracture Strains for DP980 Steel Sheets at a Wide Range of Loading Paths file N. Park, H. Huh  2014.10.29 2381
249 Evaluation of Structural Design for Improvement of the Roof Strength of a Three-Wheel Vehicle file Jesung Yoo, Junbeom K...  2014.07.10 2708
248 Tension/compression Hardening Behavior of Auto-body Steel Sheets at Intermediate Strain Rates file Geunsu Joo, Minkuk Ch...  2014.07.10 2687
247 Prediction of Deformation Behavior of PBX Simulant in a Warhead during High Speed Crash file Namsu Park, Chunghee ...  2014.07.01 2939
246 Tensile Properties of Nugget Region in Spot-welded Joints at Various Strain-Rates file Namsu Park, Moonsu Pa...  2014.07.01 2942
245 Measurement Uncertainty Evaluation of High Speed Tensile Properties of AZ 31 Sheet Considering Correlation file M. K. Choi, H. Huh, C...  2014.06.24 2654
» Evaluation and Prediction of Tensile Properties of CFRP file Junbeom Kwon, Jaeyoun...  2013.12.27 3241
243 Experimental Investigation of the Effect of the Forming Speed on the Springback Behavior of DP780 Steel Sheets file M. K. Choi, H. Huh  2013.12.27 2727
242 Evaluation of Standard Uncertainty in Modified Measurement of Dynamic Tensile Properties of Auto-body Steel Sheets file Min Kuk Choi, Sehwan ...  2013.12.27 2957
241 The stress softening-effect of polymer-bonded explosive simulant for shear deformation file Kee Sun Yeom Hoon Huh...  2013.12.10 2840
240 User Defined Material Model in LS-DYNA for Numerical Simulations of PBX Simulants file Chunghee Park Hoon Hu...  2013.08.30 4629
239 Fracture strain evaluation of the metallic materials at intermediate strain rates file Sung Jun Lim and Hoon...  2013.08.30 3068
238 Anisotropy Effect on the Fracture Strain of DP980 Sheets [1] file Namsu Park, Sung Jun ...  2013.08.29 3122
237 Evaluation of Ductile Fracture Criteria in Full Stress States file Yanshan Lou, Mingjun...  2013.02.01 5146