저자명 Jesung Yoo, Park Namsu, Hoon Huh, Heungmo Kang 
Name Jesung Yoo 
Year 2015 
page  
This paper is concerned with the tensile properties of auto-body plastics at wide strain rates ranging from 0.001/sec to 100/sec. Plastic is utilized as a structural material due to their lightweight and good formability. Auto-body structure experiences various strain rates under crash condition. Material properties of auto-body plastic are important due to their strain rate sensitivity.
Tensile test of plastic usually results in non-uniform deformation at gauge section of a specimen. This characteristic disturbs obtaining accurate material properties. Force equilibrium grid method (FEGM) is a solution which compensates non-uniform deformation problem. This method has some difficulty to utilize due to its complex procedure. Digital image correlation (DIC) method is simple and accurate strain measuring procedure which compensates the difficulty. High speed tensile test is conducted for obtaining material properties of auto-body plastic. DIC method and FEGM is utilized for measurement of strain.

Key words: High speed tensile test(고속인장시험), Strain rate sensitivity(변형률속도 민감도), Auto-body plastics(자동차용 플라스틱), DIC method(디지털 이미지 연관 기법), Force equilibrium grid method(하중평형 격자법)
번호 제목 저자명 날짜 조회 수
255 Tension/compression Test of Giga-grade Steel Sheets Considering Intermediate Strain Rates file Geunsu Joo, Hoon Huh  2017.06.07 111
254 Evaluation of Measurement Uncertainty of Dynamic Tensile Properties M.K. Choi, H. Choe, H...  2017.06.07 107
» Evaluation of Tensile Properties of Auto-body Plastics Using DIC Method and Force Equilibrium Grid Method file Jesung Yoo, Park Nams...  2017.06.07 107
252 Modeling of a Ductile Fracture Model Considering the Anisotropy of Sheet Metal file N. Park and H. Huh  2015.12.28 1979
251 Evaluation of Dynamic Hardening Models With Taylor Impact Tests at Ultra High Strain Rates For 4340 Steel file M.J. Piao, I. Lee, H....  2015.06.15 2162
250 Prediction of Fracture Strains for DP980 Steel Sheets at a Wide Range of Loading Paths file N. Park, H. Huh  2014.10.29 2309
249 Evaluation of Structural Design for Improvement of the Roof Strength of a Three-Wheel Vehicle file Jesung Yoo, Junbeom K...  2014.07.10 2626
248 Tension/compression Hardening Behavior of Auto-body Steel Sheets at Intermediate Strain Rates file Geunsu Joo, Minkuk Ch...  2014.07.10 2617
247 Prediction of Deformation Behavior of PBX Simulant in a Warhead during High Speed Crash file Namsu Park, Chunghee ...  2014.07.01 2875
246 Tensile Properties of Nugget Region in Spot-welded Joints at Various Strain-Rates file Namsu Park, Moonsu Pa...  2014.07.01 2866
245 Measurement Uncertainty Evaluation of High Speed Tensile Properties of AZ 31 Sheet Considering Correlation file M. K. Choi, H. Huh, C...  2014.06.24 2583
244 Evaluation and Prediction of Tensile Properties of CFRP file Junbeom Kwon, Jaeyoun...  2013.12.27 3165
243 Experimental Investigation of the Effect of the Forming Speed on the Springback Behavior of DP780 Steel Sheets file M. K. Choi, H. Huh  2013.12.27 2646
242 Evaluation of Standard Uncertainty in Modified Measurement of Dynamic Tensile Properties of Auto-body Steel Sheets file Min Kuk Choi, Sehwan ...  2013.12.27 2889
241 The stress softening-effect of polymer-bonded explosive simulant for shear deformation file Kee Sun Yeom Hoon Huh...  2013.12.10 2761
240 User Defined Material Model in LS-DYNA for Numerical Simulations of PBX Simulants file Chunghee Park Hoon Hu...  2013.08.30 4529
239 Fracture strain evaluation of the metallic materials at intermediate strain rates file Sung Jun Lim and Hoon...  2013.08.30 2992
238 Anisotropy Effect on the Fracture Strain of DP980 Sheets [1] file Namsu Park, Sung Jun ...  2013.08.29 3061
237 Evaluation of Ductile Fracture Criteria in Full Stress States file Yanshan Lou, Mingjun...  2013.02.01 5058
236 Effect of the Measurement Uncertaintty of Dynamic Tensile Properties on Dynamic Buckling Analysis of a Circular Tube file Sehwan Jeong Hoon Huh  2012.08.06 6465