저자명 Yanshan Lou, Mingjun Piao, Hoon Huh 
Name Proc. KSTP spring conference 
Year 2012 
page 213-216 

This paper is concerned with evaluation of various ductile fracture criteria in a general three dimensional (3D) stress state of stress triaxiality, the Lode parameter and the equivalent plastic strain to fracture. Evaluation is carried out by comparing fracture loci constructed by fracture criteria to experimental results of Al2024-T351. Comparison demonstrates that the Modified Mohr-Coulomb criterion and a newly proposed criterion provide sufficient predictability of fracture strain. Moreover, evaluation is emphasized on the predicted cut-off value for stress triaxiality. Evaluation suggests that the Cockcroft-Latham, Brozzo, Oh, Ko-Huh and the new criteria coupled a reasonable cut-off value for ductile materials.

번호 제목 저자명 날짜 조회 수
255 Tension/compression Test of Giga-grade Steel Sheets Considering Intermediate Strain Rates file Geunsu Joo, Hoon Huh  2017.06.07 110
254 Evaluation of Measurement Uncertainty of Dynamic Tensile Properties M.K. Choi, H. Choe, H...  2017.06.07 106
253 Evaluation of Tensile Properties of Auto-body Plastics Using DIC Method and Force Equilibrium Grid Method file Jesung Yoo, Park Nams...  2017.06.07 106
252 Modeling of a Ductile Fracture Model Considering the Anisotropy of Sheet Metal file N. Park and H. Huh  2015.12.28 1979
251 Evaluation of Dynamic Hardening Models With Taylor Impact Tests at Ultra High Strain Rates For 4340 Steel file M.J. Piao, I. Lee, H....  2015.06.15 2161
250 Prediction of Fracture Strains for DP980 Steel Sheets at a Wide Range of Loading Paths file N. Park, H. Huh  2014.10.29 2309
249 Evaluation of Structural Design for Improvement of the Roof Strength of a Three-Wheel Vehicle file Jesung Yoo, Junbeom K...  2014.07.10 2625
248 Tension/compression Hardening Behavior of Auto-body Steel Sheets at Intermediate Strain Rates file Geunsu Joo, Minkuk Ch...  2014.07.10 2617
247 Prediction of Deformation Behavior of PBX Simulant in a Warhead during High Speed Crash file Namsu Park, Chunghee ...  2014.07.01 2874
246 Tensile Properties of Nugget Region in Spot-welded Joints at Various Strain-Rates file Namsu Park, Moonsu Pa...  2014.07.01 2865
245 Measurement Uncertainty Evaluation of High Speed Tensile Properties of AZ 31 Sheet Considering Correlation file M. K. Choi, H. Huh, C...  2014.06.24 2582
244 Evaluation and Prediction of Tensile Properties of CFRP file Junbeom Kwon, Jaeyoun...  2013.12.27 3164
243 Experimental Investigation of the Effect of the Forming Speed on the Springback Behavior of DP780 Steel Sheets file M. K. Choi, H. Huh  2013.12.27 2645
242 Evaluation of Standard Uncertainty in Modified Measurement of Dynamic Tensile Properties of Auto-body Steel Sheets file Min Kuk Choi, Sehwan ...  2013.12.27 2888
241 The stress softening-effect of polymer-bonded explosive simulant for shear deformation file Kee Sun Yeom Hoon Huh...  2013.12.10 2760
240 User Defined Material Model in LS-DYNA for Numerical Simulations of PBX Simulants file Chunghee Park Hoon Hu...  2013.08.30 4529
239 Fracture strain evaluation of the metallic materials at intermediate strain rates file Sung Jun Lim and Hoon...  2013.08.30 2991
238 Anisotropy Effect on the Fracture Strain of DP980 Sheets [1] file Namsu Park, Sung Jun ...  2013.08.29 3061
» Evaluation of Ductile Fracture Criteria in Full Stress States file Yanshan Lou, Mingjun...  2013.02.01 5058
236 Effect of the Measurement Uncertaintty of Dynamic Tensile Properties on Dynamic Buckling Analysis of a Circular Tube file Sehwan Jeong Hoon Huh  2012.08.06 6465