저자명 Junbeom Kwon, Hoon Huh, Jinsung Kim 
Journal Experimental Mechanics 
Volume 54 
Number  
Pages 987-998 
year 2014 
This paper is concerned with comparison of the tensile properties of Al1100 thin film in a micro-scale to that of Al1100 sheet in a macro-scale. The material properties of Al1100 film and sheet with a thickness of 96 µm and 1 mm respectively have been investigated at strain rates ranging from 0.001 s-1 to 100 s-1. The experiments were conducted with Static Micro-Material Testing Machine (SMMTM) and High Speed Micro-Material Testing Machine (HSMMTM) for micro-specimens and with Instron 5583 and high speed material testing machine (HSMTM) for macro-specimens. A reliable jig system for SMMTM and HSMMTM has been newly developed for easy installation of a specimen and accurate alignment between a specimen and the jig system to enhance the reproducibility of tests. The digital image correlation (DIC) method is employed to measure the axial strain of the specimens. In order to obtain a fine speckle pattern for the DIC method, a novel technique is employed to print the speckle pattern with fine particles by blowing sprayed particles before printing.  
The grain sizes of two Al1100 specimens have been compared and the number of grains in the gauge cross-section has been calculated to obtain the grain number which is related to the specimen size effect. Electron Back Scattered Diffraction (EBSD) images were obtained for both micro-specimens and macro-specimens and analyzed to measure the grain size. The Al1100 film with a smaller average grain size shows larger strain hardening than the Al1100 sheet with a larger average grain size.

번호 제목 저자명 날짜 조회 수
128 Characterization of Hardening Behaviors of 4130 Steel, OFHC Copper, Ti6Al4V Alloy Considering Ultra-High Strain Rates and high Temperatures file M. Piao, H. Huh, I. L...  2017.10.11 1095
127 Characterization of flow stress at ultra-high strain rates by proper extrapolation with Taylor impact tests file M. Piao, H. Huh, I. L...  2017.10.11 1337
126 Rate-dependent isotropic‒kinematic hardening model in tension‒compression of TRIP and TWIP steel sheets file Geunsu Joo, Hoon Huh  2017.10.11 1242
125 Evaluation of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions with a servo-hydraulic high speed testing machine file Junbeom Kwon, Hoon Hu...  2017.06.07 1775
124 Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates file Geunsu Joo, Hoon Huh,...  2017.06.07 1437
123 Evaluation of the effect of the strain rate on the tensile properties of carbon–epoxy composite laminates file J. Kwon, J. Choi, H. ...  2017.06.07 1373
122 Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates file N. Park, M. Park, J.B...  2017.06.07 1425
121 Fracture-based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming file N. Park, H. Huh, S.J....  2017.06.07 1439
120 Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet file M.K. Choi, H. Huh, an...  2017.06.07 1257
119 Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation file Keunhwan Pack, Kwangh...  2015.12.01 2749
118 Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre-Strain file S. B. Kim and H. Huh  2015.11.18 3135
117 Anisotropy Effect on the Fracture Model of DP980 Sheets Considering the Loading Path file N. PARK, H. HUH, J. B...  2015.06.15 3007
116 Evaluation of dynamic hardening models for BCC, FCC,and HCP metals at a wide range of strain rates Hoon Huh, Kwanghyun A...  2015.02.16 3329
» Specimen and Grain Size Effects of Al1100 on Strain and Strain Rate Hardening at Various Strain Rates for Al1100 file Junbeom Kwon, Hoon Hu...  2014.08.20 4047
114 Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain rates file Chunghee Park, Hoon H...  2014.04.11 5095
113 New pseudo-elastic model for polymer-bonded explosive simulants considering the Mullins effect file Kee Sun Yeom Sehwan J...  2013.12.10 5320
112 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.12.10 4817
111 Strain Hardening Model of Pure Titanium Considering Effects of Deformation Twinning file Kwanghyun Ahn, Hoon H...  2013.09.16 5387
110 Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation file Yanshan Lou Hoon Huh  2013.04.08 7080
109 Effect of strain rate on plastic anisotropy of advanced high strength steel sheets file Jeehyang Huh Hoon Huh...  2013.04.02 5078