저자명 N. Park, H. Huh, S.J. Lim, Y. Lou, Y.S. Kang, and M.H. Seo 
Journal International Journal of Plasticity 
Pages 1-35 
year 2016 
This paper is concerned with modeling of fracture-based forming limit criteria for anisotropic materials in sheet metal forming to predict the sudden fracture in complicated forming processes. The LoueHuh ductile fracture criterion is modified using the Hill's 48 anisotropic yield function instead of the von Mises isotropic yield function to take account of the influence of anisotropy on the equivalent plastic strain at the onset of fracture. For the derivation of an anisotropic ductile fracture criterion, the principal stresses (s1,s2,s3) are expressed in terms of the stress triaxiality, the Lode parameter, and the equivalent stress based on the Hill's 48 yield function. Three different kinds of fracture based forming limit criteria are suggested and investigated with an assumption that the stress state is under the plane stress condition with proportional loading. To determine the parameters of the model proposed, the two-dimensional digital image correlation (2DDIC) method is utilized to measure the strain histories on the surface of three different types of specimens during deformation and the measurement results are investigated to identify the anisotropy effect on the equivalent plastic strain at the onset of fracture. This paper also discusses about a scaling method for a strain-based fracture forming limit criterion in order to capture the onset of fracture using a single forming limit curve for an anisotropic material. From the comparison of various forming limit criteria suggested, it is concluded that a polar effective plastic strain-based (PEPS) fracture forming limit diagram (FFLD) is suitable for prediction of the sudden fracture in AHSS sheets in complicated sheet metal forming processes on the basis of its path independence and simplicity of measuring strains in real forming processes.
번호 제목 저자명 날짜 조회 수
128 Characterization of Hardening Behaviors of 4130 Steel, OFHC Copper, Ti6Al4V Alloy Considering Ultra-High Strain Rates and high Temperatures file M. Piao, H. Huh, I. L...  2017.10.11 1095
127 Characterization of flow stress at ultra-high strain rates by proper extrapolation with Taylor impact tests file M. Piao, H. Huh, I. L...  2017.10.11 1337
126 Rate-dependent isotropic‒kinematic hardening model in tension‒compression of TRIP and TWIP steel sheets file Geunsu Joo, Hoon Huh  2017.10.11 1243
125 Evaluation of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions with a servo-hydraulic high speed testing machine file Junbeom Kwon, Hoon Hu...  2017.06.07 1776
124 Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates file Geunsu Joo, Hoon Huh,...  2017.06.07 1437
123 Evaluation of the effect of the strain rate on the tensile properties of carbon–epoxy composite laminates file J. Kwon, J. Choi, H. ...  2017.06.07 1373
122 Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates file N. Park, M. Park, J.B...  2017.06.07 1427
» Fracture-based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming file N. Park, H. Huh, S.J....  2017.06.07 1440
120 Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet file M.K. Choi, H. Huh, an...  2017.06.07 1257
119 Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation file Keunhwan Pack, Kwangh...  2015.12.01 2749
118 Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre-Strain file S. B. Kim and H. Huh  2015.11.18 3135
117 Anisotropy Effect on the Fracture Model of DP980 Sheets Considering the Loading Path file N. PARK, H. HUH, J. B...  2015.06.15 3008
116 Evaluation of dynamic hardening models for BCC, FCC,and HCP metals at a wide range of strain rates Hoon Huh, Kwanghyun A...  2015.02.16 3329
115 Specimen and Grain Size Effects of Al1100 on Strain and Strain Rate Hardening at Various Strain Rates for Al1100 file Junbeom Kwon, Hoon Hu...  2014.08.20 4047
114 Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain rates file Chunghee Park, Hoon H...  2014.04.11 5095
113 New pseudo-elastic model for polymer-bonded explosive simulants considering the Mullins effect file Kee Sun Yeom Sehwan J...  2013.12.10 5320
112 A Phenomenological energy-based Model for PBX Simulants Considering the Mullins Effect file Kee Sun Yeom Sehwan J...  2013.12.10 4817
111 Strain Hardening Model of Pure Titanium Considering Effects of Deformation Twinning file Kwanghyun Ahn, Hoon H...  2013.09.16 5387
110 Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation file Yanshan Lou Hoon Huh  2013.04.08 7081
109 Effect of strain rate on plastic anisotropy of advanced high strength steel sheets file Jeehyang Huh Hoon Huh...  2013.04.02 5078