저자명 Gihyun Bae Hoon Huh Junghan Song Seho Kim 
Journal Trans. KSAE 
Volume 14 
Number
page 112-119 
Year 2006 
This paper is concerned with the light-weight design of a center-pillar assembly for the high-speed side impact of vehicle using advanced high strength steels(AHSS). Steel industries continuously promote the ULSAB-AVC project for applying AHSS to structural parts as an alternative way to improve the crashworthiness and the fuel efficiency because it has the superior strength compared to the conventional steel. In order to simulate deformation behavior of the center-pillar assembly, a simplified center-pillar model is developed and parts of that are subdivided employing tailor-welded blanks(TWB) in order to control the deformation shape of the center-pillar assembly. The thickness of each part which constitutes the simplified model is selected as a design parameter. Factorial design is carried out aiming at the application and configuration of AHSS to simplified side-impact analysis because it needs tremendous computing time to consider all combinations of parts. In optimization of the center-pillar, S-shaped deformation is targeted to guarantee the reduction of the injury level of a driver dummy in the crash test. The objective function is constructed so as to minimize the weight and lead to S-shape deformation mode. Optimization also includes the weight reduction comparing with the case using conventional steels. The result shows that the AHSS can be utilized effectively for minimization of the vehicle weight and induction of S-shaped deformation.
번호 제목 저자명 날짜 조회 수
85 Numerical Simulation of a Gun-launched Projectile Considering Rifled-gun Tube file G. Joo, H. Huh, Y. H....  2017.08.11 150
84 Modeling of a Ductile Fracture Criterion for Sheet Metal Considering Anisotropy file N. Park and H. Huh  2017.06.07 169
83 Prediction of Fracture Strains for DP980 Steel Sheets for a Wide Range of Loading Paths file N. Park, H. Huh  2015.06.15 1142
82 Investigation of springback behavior of DP780 steel sheets after the U-bending process file M.K.Choi H.Huh  2012.11.06 4660
81 Effect of Strain Rate on Anisotropic Deformation Behavior of Advanced High Strength Steel Sheets file Jeehyang Huh Hoon Huh...  2011.12.15 6083
80 Analytical study of the effect of material properties on the formability of sheet metals based on the M-K model file Yanshan Lou Seokbong ...  2010.11.12 5596
79 Quasi-static and Dynamic Deformation Behavior of STS304- and Ta-fiber-reinforced Zr-based Amorphous Matrix Composites Fabricated by Liquid Pressing Precess file Yongjin Kim Sang Yong...  2010.07.29 8556
78 Construction of Modified Yield Loci with Respect to the Strain Rates using Hill48 Quadratic Yield Function file C. S. Lee G. H. Bae S...  2010.03.08 5170
77 Forming Limit Diagram of DP590 considering the Strain Rate [1] [1] file S. B. Kim K. H. Ahn J...  2010.02.23 5732
76 Development ofAl Crash Box for High Crashworthiness Enhancement file J. S. Yoo S. B. Kim M...  2008.12.15 5136
75 Microscopic Investigation of the Strain Rate Hardening for Polycrystalline Metals file J. H. Yoon H. Huh C. ...  2008.03.10 5676
74 Finite Element Inverse Analysis of the Deep Drawing Process Considering Bending History file Jeehyang Huh Jonghuh ...  2007.12.21 5042
73 3-D Finite Element Modeling of Fiber Reinforced Rubber Composites using a Rebar Element file S.H. Jeong J.H. Song ...  2007.01.10 6009
72 Dynamic Constitutive Equations of Auto-body Steel Sheets with the Variation of Temperature (Ⅱ) –Flow Stress Constitutive Equation– file H. J. Lee J. H. Song ...  2007.01.09 4678
71 Dynamic Constitutive Equations of Auto-body Steel Sheets with the Variation of Temperature (I)-Dynamic Material Characteristics with the Variation of Temperature file H. J. Lee J. H. Song ...  2007.01.09 4913
» Light-weight Design with a Simplified Center-pillar Model for Improved Crashworthiness file Gihyun Bae Hoon Huh J...  2007.01.09 5069
69 Dynamic Tensile Characteristics of the High Strength Steel Sheet for an Auto-body file S. B. Kim H. Huh C. L...  2007.01.09 4381
68 Crash Analysis of the ULSAB-AVC Model with Considering Forming Effects file H. Huh J. H. Yoon Y. ...  2006.12.11 4348
67 Stress-Based Springback Reduction of an AHSS Front Side Member file J. H. Song S. H. Kim ...  2006.08.30 4532
66 Dynamic Material Property of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content file J.H. Song H. Huh  2006.08.02 5642