Forming Limit Diagram of DP590 considering the Strain Rate

2010.02.23 10:48

csmd 조회 수:5673

저자명 S. B. Kim K. H. Ahn J. W. Ha C. S. Lee H. Huh H. H. Bok M. B. Moon 
Journal Trans. KSAE 
Volume 18 
page 127-130 
Year 2010 

This paper deals with the formability of DP590 steel considering the strain rate. The strain hardening
coefficient, elongation and r-value were obtained from the static and dynamic tensile test. As strain rate increases from
static to 100/s, the strain hardening coefficient and the uniform elongation decrease and the elongation at fracture and
r-value decrease to 0.1/s and increase again to 100/s. The high speed forming limit tests with hemi-spherical punch were
carried out using the high speed crash testing machine and high speed forming jig. The high speed forming limit of
DP590(order of 102/s) decreases compared to the static forming limit(order of 10-3/s) and the forming limit band in high
speed forming test is narrower than that in the static forming test. This tendency may be due to the development of
brittleness with increase of stain rate.

번호 제목 저자명 날짜 조회 수
25 High Speed Tensile Test of Steel Sheets for an Auto-body at the Intermediate Strain Rate file Lim, J.H. Kim, S.B. K...  2006.01.07 3467
24 Evaluation of the Finite Element Modeling of Spot-Welded Region for Crash Analysis file J.H. Song H. Huh H.G....  2006.03.15 3587
23 A Study on the Strain-Rate Sensitivity According to the Temperature for Steel Sheet of an Auto-Body file H.J. Lee J.H. Song S....  2006.05.02 3328
22 Finite Element Analysis of the Hydro-mechanical Punching Process J. H. Yoon H. Huh S. ...  2006.06.12 4768
21 Comparative Crashworthiness Assessment of the ULSAB-AVC model with Advance High Strength Steel and with Low strength steel file J. H. Yoon H. Huh S. ...  2006.06.12 4224
20 Dynamic Material Property of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content file J.H. Song H. Huh  2006.08.02 5583
19 Stress-Based Springback Reduction of an AHSS Front Side Member file J. H. Song S. H. Kim ...  2006.08.30 4482
18 Crash Analysis of the ULSAB-AVC Model with Considering Forming Effects file H. Huh J. H. Yoon Y. ...  2006.12.11 4302
17 Dynamic Tensile Characteristics of the High Strength Steel Sheet for an Auto-body file S. B. Kim H. Huh C. L...  2007.01.09 4334
16 Light-weight Design with a Simplified Center-pillar Model for Improved Crashworthiness file Gihyun Bae Hoon Huh J...  2007.01.09 5017
15 Dynamic Constitutive Equations of Auto-body Steel Sheets with the Variation of Temperature (I)-Dynamic Material Characteristics with the Variation of Temperature file H. J. Lee J. H. Song ...  2007.01.09 4852
14 Dynamic Constitutive Equations of Auto-body Steel Sheets with the Variation of Temperature (Ⅱ) –Flow Stress Constitutive Equation– file H. J. Lee J. H. Song ...  2007.01.09 4616
13 3-D Finite Element Modeling of Fiber Reinforced Rubber Composites using a Rebar Element file S.H. Jeong J.H. Song ...  2007.01.10 5948
12 Finite Element Inverse Analysis of the Deep Drawing Process Considering Bending History file Jeehyang Huh Jonghuh ...  2007.12.21 4988
11 Microscopic Investigation of the Strain Rate Hardening for Polycrystalline Metals file J. H. Yoon H. Huh C. ...  2008.03.10 5614
10 Development ofAl Crash Box for High Crashworthiness Enhancement file J. S. Yoo S. B. Kim M...  2008.12.15 5081
» Forming Limit Diagram of DP590 considering the Strain Rate [1] [1] file S. B. Kim K. H. Ahn J...  2010.02.23 5673
8 Construction of Modified Yield Loci with Respect to the Strain Rates using Hill48 Quadratic Yield Function file C. S. Lee G. H. Bae S...  2010.03.08 5113
7 Quasi-static and Dynamic Deformation Behavior of STS304- and Ta-fiber-reinforced Zr-based Amorphous Matrix Composites Fabricated by Liquid Pressing Precess file Yongjin Kim Sang Yong...  2010.07.29 8496
6 Analytical study of the effect of material properties on the formability of sheet metals based on the M-K model file Yanshan Lou Seokbong ...  2010.11.12 5536