Forming Limit Diagram of DP590 considering the Strain Rate

2010.02.23 10:48

csmd 조회 수:5730

저자명 S. B. Kim K. H. Ahn J. W. Ha C. S. Lee H. Huh H. H. Bok M. B. Moon 
Journal Trans. KSAE 
Volume 18 
Number
page 127-130 
Year 2010 

This paper deals with the formability of DP590 steel considering the strain rate. The strain hardening
coefficient, elongation and r-value were obtained from the static and dynamic tensile test. As strain rate increases from
static to 100/s, the strain hardening coefficient and the uniform elongation decrease and the elongation at fracture and
r-value decrease to 0.1/s and increase again to 100/s. The high speed forming limit tests with hemi-spherical punch were
carried out using the high speed crash testing machine and high speed forming jig. The high speed forming limit of
DP590(order of 102/s) decreases compared to the static forming limit(order of 10-3/s) and the forming limit band in high
speed forming test is narrower than that in the static forming test. This tendency may be due to the development of
brittleness with increase of stain rate.

번호 제목 저자명 날짜 조회 수
85 Numerical Simulation of a Gun-launched Projectile Considering Rifled-gun Tube file G. Joo, H. Huh, Y. H....  2017.08.11 145
84 Modeling of a Ductile Fracture Criterion for Sheet Metal Considering Anisotropy file N. Park and H. Huh  2017.06.07 167
83 Prediction of Fracture Strains for DP980 Steel Sheets for a Wide Range of Loading Paths file N. Park, H. Huh  2015.06.15 1139
82 Investigation of springback behavior of DP780 steel sheets after the U-bending process file M.K.Choi H.Huh  2012.11.06 4658
81 Effect of Strain Rate on Anisotropic Deformation Behavior of Advanced High Strength Steel Sheets file Jeehyang Huh Hoon Huh...  2011.12.15 6080
80 Analytical study of the effect of material properties on the formability of sheet metals based on the M-K model file Yanshan Lou Seokbong ...  2010.11.12 5595
79 Quasi-static and Dynamic Deformation Behavior of STS304- and Ta-fiber-reinforced Zr-based Amorphous Matrix Composites Fabricated by Liquid Pressing Precess file Yongjin Kim Sang Yong...  2010.07.29 8554
78 Construction of Modified Yield Loci with Respect to the Strain Rates using Hill48 Quadratic Yield Function file C. S. Lee G. H. Bae S...  2010.03.08 5169
» Forming Limit Diagram of DP590 considering the Strain Rate [1] [1] file S. B. Kim K. H. Ahn J...  2010.02.23 5730
76 Development ofAl Crash Box for High Crashworthiness Enhancement file J. S. Yoo S. B. Kim M...  2008.12.15 5133
75 Microscopic Investigation of the Strain Rate Hardening for Polycrystalline Metals file J. H. Yoon H. Huh C. ...  2008.03.10 5674
74 Finite Element Inverse Analysis of the Deep Drawing Process Considering Bending History file Jeehyang Huh Jonghuh ...  2007.12.21 5041
73 3-D Finite Element Modeling of Fiber Reinforced Rubber Composites using a Rebar Element file S.H. Jeong J.H. Song ...  2007.01.10 6008
72 Dynamic Constitutive Equations of Auto-body Steel Sheets with the Variation of Temperature (Ⅱ) –Flow Stress Constitutive Equation– file H. J. Lee J. H. Song ...  2007.01.09 4674
71 Dynamic Constitutive Equations of Auto-body Steel Sheets with the Variation of Temperature (I)-Dynamic Material Characteristics with the Variation of Temperature file H. J. Lee J. H. Song ...  2007.01.09 4911
70 Light-weight Design with a Simplified Center-pillar Model for Improved Crashworthiness file Gihyun Bae Hoon Huh J...  2007.01.09 5067
69 Dynamic Tensile Characteristics of the High Strength Steel Sheet for an Auto-body file S. B. Kim H. Huh C. L...  2007.01.09 4379
68 Crash Analysis of the ULSAB-AVC Model with Considering Forming Effects file H. Huh J. H. Yoon Y. ...  2006.12.11 4347
67 Stress-Based Springback Reduction of an AHSS Front Side Member file J. H. Song S. H. Kim ...  2006.08.30 4530
66 Dynamic Material Property of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content file J.H. Song H. Huh  2006.08.02 5640